1. TRACK AND
Track shall be extruded hardened aluminium with a maximum channel wall
thickness of 4.20mm in 6060-T5 alloy. The weight of the extrusion shall
be no less than 5.76kg per lineal metre length.
The track channel shall be complete with clip-on extruded cover of 6060-T5
alloy with a provisional lip to carry or support the ceiling panel above.
The track covers come in either durable anodise or coloured powdercoat.
The track carrying capacity shall be 120kg dynamic load per meter run.
When the carriage twin wheels are loaded, the inside dimensions of the
track shall not be more than 2.0mm wider than the original to ensure free
The Austvision carriage rail shall be a unirail single unit extrusion
to form a channel for heavy-duty performance. The rail channel wall thickness
shall be no less than 5.0mm to ensure maximum rigidity and the security
of the carriage.
The unirail extrusion shall be 6060-T5 hardened alloy and the unirail
shall be complete with stainless steel covers of satin no. 4 finish.
2. TWIN WHEEL CARRIAGE
The carriage is designed with a stabiliser wheel to prevent free side
swing of the slydstak door panel.
The wheel shall be machined from acetal polymer plastic with a high impact,
high service temperature resistance (up to 100°C) and low moisture
The carriage shaft shall be 12mm diameter, machined from stock 304 grade
stainless steel bar with an ultimate tensile strength of 600mPa to ensure
it remains corrosion free for the duration of its operating life.
The self-lubricating roller bearings of the wheel carriage shall have
a carrying capacity of no less than 280kg.
4. UNIQUE FEATURES SUMMARY
extrusion profile for universal frameless glass door rails.
for strength and accurate cover & end cap location.
end caps with locating lug and screw.
locking plugs and flex-design for positive glass clamping and ease
of adjustment or glass replacement.
glass with uneven surfaces.
|| High strength
cast bronze pivot adaptor for preventing noise and wear. Fits most
types of floor spring spindles.
technique for side cover locking.
10 & 12mm glass as standard and can be machined for 15mm &
5. DOOR RAILS
frameless door assembly door rails shall be of heavy duty 85mm height
Austvision UNI-Rail, manufactured from single body aluminium extrusion
alloy 6060-T5 with minimum wall thickness of 6.0mm on each side of
glass. The UNI-Rail shall allow the covers to slide into place and are
secured by aluminium special profile inserts to resist impact from
and knocking and avoid covers dislodging from the body by knocking. A
unique feature is that the covers are easily removed for maintenance
damage to either the covers or the rail body.
The door rail shall
be secured to the glass door panel by means of high strength nylon
for simple installation and allow final adjustment before and after completion
The door rail shall
have stainless steel end caps with locating lugs to ensure the caps do
not twist out of place.
The UNI-Rail end caps
shall be manufactured in stainless steel with a locating lug to avoid
rotation of the end caps.
The door rails were
tested with an average pull out load of 2500N without any visual distorsion.