TECHNICAL
Austvision High Strength (H.S.) Stub Post fittings
will suit:  Glass panels 8mm up to 19mm thick.
Glass Panels – toughened (tempered), flat and
curved glass, toughened laminated glass and
toughened patterned, rolled or slump glass.
Other materials such as Polycarbonate
perspex, PVC sheeting are all within the
scope for the supply and install package to
conform to the Australian Standard AS1926
Swimming Pool Safety and AS1288-2006 Glass in
Buildings.
Grout Fixings
Austvision Stub Post is manufactured from high strength austenitic-ferritic 329 grade stainless steel which has excellent
strength and resistance Characteristics to stress-corrosion, cracking and chemical attack by Chlorinated water and resistance
Surface Mounting
The ultimate strength of the 329 grade stainless steel is 850 MPa thisis equivalent to the strength of 2205 grade duplex
stainless steel on bars and plates which is over double the strength of 304 and 316 grade stainless steel commonly used
in the building/construction industries.
Austvision H.S. Stub Post is designed with dual fixing technology to ensure no stress concentration around and on the
toughened glass panel holes and that the stresses on the glass panel are uniformly distributed along the fixing edges.
As a result Austvision H.S. Stub Post carries higher wind, live and human impact loads and extra high bending and deflection
value for reliable performance.
Austvision H.S. Stub Post stainless steel fittings have been laboratory tested and conform to Australian Standards AS1926.1,
AS1926.2 – 1995 Swimming Pool Safety for Domestic and Commercial Installations and AS1288 – 2006 on Balustrade
Installations.
Finish: Standard Finish – Satin Stainless Steel No. 4 Linish or Brush Finish - (Polish Stainless Steel No. 6 available on
application).
|
